The Foredom® #10 Quick Change Handpiece is a slender hand piece with rotating lever action that releases and closes the collet for quick and easy changes. It requires lubrication after the first 2-3...

The Foredom® #15 Hammer Handpiece has hammering rather than rotary action for use at low speed (0-5,000 rpm) by jewelers for stone setting and decorative work. Comes with an anvil point. It...

The Foredom® #15D Duplex Hammer Handpiece has the same specs as the Foredom® #15 Hammer Handpiece, except it includes a duplex spring for added flexibility. Foredom® #15D Hammer Handpiece has hammering rather...

The Foredom® #18 Quick Change Handpiece is for use with only 2.35mm (3/32") shank burs. A press lever action is all that is required to change accessories. It features a...

The Foredom® #18D Duplex Quick Change Handpiece has the same specs as the Foredom® #18 Quick Change Handpiece, except it includes a duplex spring for added flexibility. Foredom® #18D Duplex Quick Change...

The Foredom® #20 Quick Change Handpiece is for exclusive use with 3/32" (2.35mm) shank burs. A lever action on the the handpiece body is all that is required to change...

The Foredom® #20D Duplex Quick Change Handpiece has the same specs as the Foredom® #20 Quick Change Handpiece, except includes a duplex spring for added flexibility. Foredom® #20D Duplex Quick...

The Foredom® #30 General Purpose Handpiece has prefabricated ball bearings that do NOT require any additional lubrication. Comes with a chuck key in molded plastic handle for changing accessories. Replacement chuck keys are...

The Foredom® #9D Powergraver Handpiece with palm rest works and feels like a hand engraving tool with the added advantages of greater control and the ability to adjust the impact force. It...

HP775 Duplex Adapter adds a Duplex Spring between key tip shaft and key tip handpiece. Duplex Springs allow greater flexing at the handpiece end of the shaft for more subtle, finer...

IMPORTANT: Chuck Arbor is Right Side Specific. See Product Options for Arbor that fits current lathes with 5/16″ motor shafts built in 2002 and later or much with 1/4″ motor...

10 Sandpaper Belts and Mounting Tools included with Kits: 10mm x 257mm Belt, 180 grit installed. 3 each of 100, 180 & 240 grit, 10mm belts. A-69210 Drive Cup and...

Powerful variable speed bench lathe in a compact size suitable for use at the workbench. Its permanent magnet motor is extremely quiet and smooth running with all the power and...

This compact lathe is suitable for use at the workbench. It has a 1/6 hp, high torque, permanent magnet motor that is extremely quiet and smooth running. Comes with precision...

Hammer handpiece for stone setting and engraving. Hammer action engages ONLY when light pressure is applied. This prevents unintended marring or marks and allows precise placement of tool tip. Force...

Measures 7" wide by 4" high and features a center cup 2-3/4" diameter x 3" deep for small tools such as scribes, files and screwdrivers. Burs and accessories pictured not...

Sold by pair.

Sold in a pair.

The Foredom® Chuck Key is an essential tool for precision and accuracy in your work. With its unique design and high-quality material, it ensures a secure grip and smooth operation,...

Foredom® Chuck Key in Plastic Model Handle

Tray Arm offers another style for organizing and storing small tools that are easily misplaced on a work top or end up buried inside of a drawer. It comes with 3...

Stores and organizes up to 95 rotary accessories with 3/32" and 1/8" shanks. It has a mounting bracket for attaching to the Double Motor Hanger. It can also be installed on two...

Jar Arm stores and organizes small jewelry making components and various types of other small items that are easily misplaced on a work bench. It has a mounting bracket for attaching to...

The Magnetic Arm is covered with non-scratch felt on both sides and features excellent magnetic holding power. The arm has a mounting bracket for attaching to the Double Motor Hanger. It can also be installed...

Multi Handpiece Arm offers another style for organizing and storing up to six different Foredom® Handpieces. The arm has a mounting bracket for attaching to the Double Motor Hanger. It can also be...

Peg Arm has 5 angled, 1-1/2" long stainless steel pegs on each side of arm and non-scratch felt along upper edge. The arm has a mounting bracket for attaching to the Double Motor...

Dual Handpiece Rest attaches to the new Double Motor Hanger or alternate component support rods for holding one or two Foredom® hand pieces when not in use. Handpiece Rest: 5-1/4 long x 3-1/4...

LED Light Bar with Shade is designed to illuminate an entire work surface. This unique light is "ON"  when in the horizontal position and "OFF" when pivoted 90º upright (see photos). The Light...

The shelf arm has a mounting bracket for attaching to the Double Motor Hanger. It can also be installed on two other component support rods that are great for users who already...

Perfect for any lab, studio and work space that creates harmful dust and debris! Simple to use and ideal for anyone concerned about working in a clean and safe environment. Foredom’s®...

The new Double Motor Hanger features a 25-3/4" long x .875" diameter Upright Rod and Angled Extension Rod with two spring safety clips for holding one or two motors. It comes...

Double Motor hanger with bench clamp mount features 3-pc hexagonal support rod and safety hook rod for holding one or two motors. IMPORTANT: Work Bench System Component Arms do NOT...

This Foredom® Drill Press is a rugged and precise stand which converts your Foredom® flexible shaft power tool into a drill press by securely holding a handpiece in a vertical position...

Heavy gauge sheet metal construction with non-skid pads on the bottom. Has 2 1/2" (64mm) adapter that fits most collection system hoses. 6 1/2" h x 4 5/8" wide x...

The reliable Foredom® FCT Electronic Foot Control Pedal is Foredom's® most popular foot operated speed control. It is made of heavy-duty plastic with durable solid state electronics. The ergonomics allow precise...

Developed to work with Foredom's Bench Lathe, the Filter Hood is compact, powerful and portable. Use in jewelry, dental labs, industry or woodworking to collect dust and larger particles produced...

Foredom’s new Fishmouth with bench pin, curved acrylic shield, and adjustable arm rests is the perfect addition to any bench for dust control and debris removal. It mounts to any...

Flexible shaft lubricant. The flexible inner shaft should be checked, wiped clean, and relubricated with grease every 50 hours of use. With every 200 hours of use, the shaft should...

This 1/8" thick rubber cushion provides an added layer of comfort to H.30 and H.30SJ Handpieces. Grip slides on easily bolt holds firmly. Handpiece pictured not included.

Allows you to hold the handpiece steady and to bring the work piece to the tool. Comes with hand piece mount, road and clamp. Handpiece pictured sold separately.

Brushless motor design – eliminating the need to replace carbon brushes. Manual. Two speed settings:Setting  1 – Full speed range up to 50,000 RPM.Setting 2 – 500 RPM – 5,000...

For high speed applications up to 38,000 rpm including light deburring of cast pieces, bright cutting in jewelry making and fine detailing in wood. Kit includes control box, handpiece with...

Replacement inner shaft for Foredom® flexshafts.

Super bright, 200 lumen daylight quality 5-bulb fixture tilts on its magnetic base to direct light where needed. Magnetic On/Off remote switch box for positioning in convenient location.  Specifications: LED...

Foredom’s® Lighted Work Chamber is a great addition for dental and other lab technicians, jewelers, carvers, and fabricators working with small workpieces. It offers excellent visibility and keeps dust and...

Foredom’s Mobile Work Station is a unique and versatile solution for small and crowded labs, studios and other work spaces. Its tower structure, with built-in electrical outlets, allows users to...

Foredom Motor and Handpiece Oil in hypodermic dispenser comes in handy when trying to maintain tools. MSDS.

Replacement motor connector for use with Series TX, SR (1/6 and 1/8 hp), LX, L, PGX, PG, S, and CC motors. Please note that this is the motor connector only.