This double ended watch case opener is a must have! One side is equipped with a blunt edge for easy to open cases, while the other end has an extremely...

Block of abrasive powder and synthetic rubber for polishing, unrusting, cleaning etc. Dimensions: 80 x 50 x 20 mm. Instructions for use Use dry. Water, soap, petroleum etc. may increase...

In polished steel. Length: 150 mm. Made in Switzerland.

Pair of hands remover, tips in hardened and nickel-plated steel 54HRC, handle in anodized aluminum, width 2.5 mm, length 105 mm. Made in Switzerland.

Set of 4 screwdrivers with hexagonal blades. 54/56 HRC Hardened stainless steel blades. Made in Switzerland. 1.50, 2.00, 2.50, 3.00 mm.

Black anti-slip sleeve with blade safety lock. • Stainless steel material 440/57 HRC. Security lock: press the SWIZA cross to unlock the blade and close it.

Round head. Chucks of hardened steel. Chromium plated handle. Made in Switzerland.

Set of 4 square-head pin vises. Made in Switzerland. One of each 80, 100, 120, 140 mm.

Fine quality aluminum casting. Very easy to handle. This plier has: 1 screw (A) to adjust the width from 10 to 30 mm. 1 Return spring. 2 notches for positioning...

Removable eyeglass with a protected clip.

Ergonomic Screwdriver of stainless steel and elastomer coat with head of synthetic self-lubricating POM material and blades of hardened stainless steel 54/56HRC. Includes sizes 0.80, 1.0, 1.2, 1.4 & 1.6...

Ergonomic Screwdriver of stainless steel with head of synthetic self-lubricating POM material and "Phillips" blades of hardened stainless steel 53/55HRC.Ø 1.20 / 1.50 / 2.00 / 2.50 / 3.00 mm. Made...

Made of synthetic POM-C, black. Stable and provided with an anti-slip film. 6 screwdrivers N° 30081: Ø 0.80, 1.00, 1.20,1.40, 1.60, 2.00 mm. Body made of stainless steel. Blade made...

Beautifully made precision screwdrivers in nine sizes: .019", .023", .031", .039", .047", .055", .065", .078" and .089" (.50, .60, .80, 1.00, 1.20, 1.40, 1.60, 2.00 and 2.50 mm) with an...

Soft and will not scratch the parts. Match the shape of watchcases with different geometries. Made in Switzerland. 

Slightly soft and flexible allowing to execute various works such as assembly, casing and control in optimal conditions thanks to a better contrast with the different colors. The anti-skid lower surface...

Slightly soft and flexible allowing to execute various works such as assembly, casing and control in optimal conditions thanks to a better contrast with the different colours. The anti-skid lower...

Tool for extraction of watch bezels, diver type. Tool provided with 3 adjustable clamping jaws (height 3.5 mm) of hardened and tempered steel, suitable for bezels ranging in Ø from 27...

Swiss-made gauge for bracelets.  Two way measurements. Max. opening: 90 x 65 mm. The sum of the two measurements indicates the inside dimensions of the bracelet in cm. Made of...

Caliper for measuring the distance between the lugs. Measures in mm and inches. Made in Switzerland.

High temperature resistant, carbon fiber tweezer. Usable cleanroom 10-1000 class. Sold individually. Made in Switzerland.

High temperature resistant, carbon fiber tweezer. Usable cleanroom 10-1000 class. Sold individually. Made in Switzerland.

For pressure back covers. Better grip thanks to its anodized aluminium handle Ø 23 mm. Stainless steel blade. Total length 138 mm (5.4 inches) Made in Switzerland.

For pressure back covers Plastic handle 140 mm length Made in Switzerland.

For pressure back covers. Plastic handle. Total length is 5.5". Made in Switzerland.

Swiss made case wrench Six precision chucks to fit Oyster case backs Sizes 18.5, 20.2, 22.5, 26.5, 28.3 and 29.5 mm Made in Switzerland.

For Polygonal cases, the chucks are mobile and grip the case back perfectly, whether these are 6, 8, 10, 12 or 14 sided. Made in Switzerland. Includes: 4 chucks for polygonal cases.  2 chucks...

Allows you to remove a bracelet from its box without disassembling the clasp. Made in Switzerland.

Concave-convex pliers In polished steel. With plastified handles. Box joint. Length 130 mm. Made in Switzerland.

Universal crystal lift tools for unbreakable crystals of 10 - 45 mm (41/2" - 20"). Removes and inserts immediately, crystals without disassembling the watch. Will not damage the crystal. For any...

Cutting capacity: non-hardened steel and stainless steel ≤ Ø 1.5 mm. With dual leaf springs made of stainless steel. The ergonomic handles with the « Soft Touch » non-slip rubber surface offers...

A revolutionary new product for the jewelery sector! Professionals in the industry will certainly appreciate the efficiency and user-friendliness of this innovative digital ring stick from Bergeon, which is accurate...

Dust blower with PVC nozzle and inlet-valve at the bottom of the bulb (to prevent air from entering by way of the nozzle). Made in Switzerland. Color may vary.

White felt wheel, Ø 60 mm, wooden center, Ø hole 5 mm, thickness 20 mm.

With dual leaf springs made of stainless steel The ergonomic handles with the « Soft Touch » non-slip rubber surface offers excellent adhesion and a pleasant grip.

With dual leaf springs made of stainless steel The ergonomic handles with the « Soft Touch » non-slip rubber surface offers excellent adhesion and a pleasant grip.

Structured, stiff and isopropyl alcohol resistant surface, adhesive undersurface. Dim. 320 x 240 x 1.5 mm. Made in Switzerland.

Jaxa Key specifically designed to open case backs of large watches. The ergonomic shape provide a firm and comfortable grip. Opens diameters from 18 mm to 62 mm. Made in Switzerland.

Allows to open waterproof watches. Polyamide PA12 shell. Opening diameter from 16 mm to 52 mm. Interchangeable jaws in hardened steel. Supplied with 1 set of 2 jaws N° 2819-B....

Pliers to drive out and to remove pins for all types of metal bands This is an efficient tool used for inserting, removing and reinserting pins for all types of...

Monocomponent anaerobic product. Very fluid. Very good resistance to chemical agents. Quick hardening, even through a thin film of oil. Used: assembling of cylindrical fittings (crowns, winding stems, screws). Technical...

Extensible and reversible movement holder. For calibres 8 3/4''' - 19'''. Nickelled and sanded. Made in Switzerland.

To drive in and out pins, to screw and unscrew watch bracelets. Made in Switzerland. Manual.

Set of 4 oilers. Made in Switzerland.

Swiss-made tool to drive bracelet pins in and out. One side to drive out springbars (Reference Fig. 1 and 2) One side to drive pins in and out (Reference Fig. 3 and 4)...

Press for fitting of unbreakable crystals with or without tension ring. Made in Switzerland. Includes 1 press, 1 set of 9 stakes, 1 set of 12 stakes, 1 lower stake,...

This Swiss quality Quick Service Set is a watchmaker's dream! This set contains a total of 18 Swiss quality items contained in a plastic, top handle case. Kit includes: Jaxa...

Made in Switzerland.