Unique flexible bond polishing floppys for mirror finishing hard to reach areas on all precious metals. Mounted on 3/32" shank. Maximum speed is 7,000 - 10,000 RPM. COLOR GRIT  BLUE...

COLOR GRIT BLUE VERY COARSE GRAY COARSE RED MEDIUM GREEN  FINE

For safe polishing of jewelry set with stones. Soft, flexible polishers for smoothing precious metal alloys. 3/32" shank.

For safe polishing of jewelry set with stones. Soft, flexible polishers for smoothing precious metal alloys. 3/32" shank.

For safe polishing of jewelry set with stones. Soft, flexible polishers for smoothing precious metal alloys. 3/32" shank.

Various grades of emery paper glued to flat wood handles that measure 9" x 3/4". Abrasive is 7" long. Use for manual sanding and polishing of all materials. Sold individually. COARSE...

10 Sandpaper Belts and Mounting Tools included with Kits: 10mm x 257mm Belt, 180 grit installed. 3 each of 100, 180 & 240 grit, 10mm belts. A-69210 Drive Cup and...

Diamond impregnated polishers for platinum and hard metal alloys. Polishers with synthetic rubber bond, grit diamond. Resistant, long service life, effective reduction/polishing. Use for trimming/reduction. smoothing/pre-polishing and high-shine polishing. Material...

Diamond impregnated polishers for platinum and hard metal alloys. Polishers with synthetic rubber bond, grit diamond. Resistant, long service life, effective reduction/polishing. Use for trimming/reduction. smoothing/pre-polishing and high-shine polishing. Material...

Diamond impregnated polishers for platinum and hard metal alloys. Polishers with synthetic rubber bond, grit diamond. Resistant, long service life, effective reduction/polishing. Use for trimming/reduction. smoothing/pre-polishing and high-shine polishing. Material...

The gray satin buffs incorporate silicon carbide and are also treated with a special resin. 1/4" hole, perfect for tapered spindles. Ultra fine grit.

Long recognized for the clean, sharp surfaces they produce on tools, dies, blades, molds and almost any other metal piece requiring sharpening or smoothing.

Made  from compressed, non-woven aluminum oxide fibers that are layered into flaps set around a circular hub made of plastic, this wheel is prized for the beautiful satin finish it...

Made  from compressed, non-woven aluminum oxide fibers that are layered into flaps set around a circular hub made of plastic, this wheel is prized for the beautiful satin finish it...

Efficiently cut through chrome and non-precious metal sprues with JSP® Separating Discs. These double sided, thin silicon carbide grinding disks are designed with a pinhole for easy mandrel mounting. With...

For polishing gravers and other jewelry making tools.  Due to the special bond and an extra high proportion of bonded diamond grains, the grinders are ideal for shaping and grinding hard...

7/8" diameter. Pack of 10 discs.

Achieving a perfect polishing result is an integral part of everyday laboratory work. In order to achieve this as quickly, easily, and efficiently as possible, we have invented the polishing...

The Komet® Graver Tool Kit is a high-performance set designed for shaping, sharpening, and polishing gravers and other jewelry-making tools. It features diamond-abrasive wheels that offer a smooth, low-heat grinding...

For grinding all types of ceramics including zirconia, also works on metal alloys and carbide. Diamond Abrasive - Suitable for a vast range of grinding applications,. Sintered Komet®, this abrasive features...

Kyle® Floppy Wheels come in a convenient box of 100, designed for precision polishing and finishing in jewelry making. Their flexible construction allows them to conform to intricate shapes and...

Mounted on a 3/32" shank, these polishers feature both emery paper flaps and satin-finish flourishes.

Aluminum oxide grit mounted on a special reinforced plastic backing. Lasts 2 to 3 times longer than conventional paper-backed discs. Brass centers for use with snap-on mandrel. Measure 3/4". Sold...

Aluminum oxide grit mounted on a special reinforced plastic backing. Lasts 2 to 3 times longer than conventional paper-backed discs. Brass centers for use with snap-on mandrel. Measure 5/8". Sold...

Steel mandrel for abrasive cartridge rolls. Pilot guides roll for absolute true running. For use with cartridge rolls. 3/32" shank. Sold individually.

Steel arbors with a solid synthetic rubber drum. Expands evenly to hold sanding bands. Cushioned backing for a smooth cut and uniform finish. 3/32" shank. For use with sanding bands....

Steel arbors with a solid synthetic rubber drum. Expands evenly to hold sanding bands. Cushioned backing for a smooth cut and uniform finish. 3/32" shank. For use with sanding bands....

Will fit wheel sizes up to those listed. Ideal for use with rubberized abrasives.

Inside ring cylinder mandrel. Use for inside ring polishers. 3/32" shank comes with a full thread starting from the top. Sold individually.

Choose shank size. 

Foredom's micro chuck mandrel is specifically for use with #70 - #80 drills. 10,000 RPM max speed. Sold individually.

Chuck mandrel for silicone pins. Pins can be held at various lengths. 3/32" shank.

Mandrel for abrasive wheels, cutting discs and bristle brushes. For use in flexshaft handpiece. Thread ends are right handed. 3/32" shank.  

Reinforced screw mandrel with 1/8" shank. Sold individually.

Designed for felt buffs, wheels, cylinders and points. Threads are right handed. Use for wheels with 1/16" arbor hole. 3/32" shank.

Mandrel for abrasive wheels, cutting discs and bristle brushes. For use in flexshaft handpiece. Thread ends are right handed.  

One piece construction with a snap-on end. Square drive is positive and avoids slippage. 3/32" shank.

Mandrel with slot to grip abrasive paper or cloth. Use to build a suitable diameter for inside finishing. 3/32" shank. Thin 9/64" Head Regular 11/64" Head  

Mandrel with slot to grip abrasive paper or cloth. Use to build a suitable diameter for inside finishing. 3/32" shank. 3/16" Head. 

Mandrel for abrasive wheels, cutting discs and bristle brushes. For use in flexshaft handpiece. Thread ends are right handed. Shank: 3/32" Head Ø: 3/16" Thread: 1/16"   

Use for through or blind holes in cylinders Thread ends are right handed. Shank: 3/32". 5/8" long with nut.

Expertly remove file marks and parting lines, as well as smooth out imperfections with our Marathon Unitized Satin Finish Wheels. These non-loading fiber abrasives provide a fast-cutting action and leave...

Made in Germany by Starcke GmbHS. These waterproof papers produce a finer scratch pattern, making it easier to polish. All Matador Waterproof Paper is backed with "A" weight paper, which is...

Flexible polyester, firmly coated with aluminum oxide particles. Fine/Medium. 

ONE SIDE ONLY ABRASIVE, PERFORATED. Suitable for interproximal procedures. Accurate and easy to handle, they can also be used in restorative adjustments, removing interproximal calculus, and removing excess cement. Sold...

Double sided abrasive. Medium abrasive Suitable for interproximal procedures. Accurate and easy to handle, they can also be used in restorative adjustments, removing interproximal calculus, and removing excess cement. 4...

DOUBLE SIDED ABRASIVE with raised dimples. 4.0 mm wide. Suitable for interproximal procedures. Accurate and easy to handle, they can also be used in restorative adjustments, removing interproximal calculus, and...

This flexible texturing wheels are great for putting a satin finish on jewelry, stainless steel, profiled surfaces and on fine structured satinized surfaces. Mounted on a 3/32" mandrel. Measures 1" diameter x...