Stainless steel bowl holds workpiece when soldering, leaving both hands free. Mounted on solid base, bowl adjusts in any position for use on any job. Bowl is 4" in diameter...

Can be tipped to any angle with multi-faced sides and used for melting waxes. Cap is nickel plated brass with adjustable 3/16" wick.

Can be tipped to any angle with multi-faced sides and used for melting waxes. Cap is nickel plated brass with adjustable 1/2" wick.

A liquid mask that when brushed on will prevent solder flow to unwanted areas. May be used for hard or soft solders. MSDS

This Antique French Copper Ladle is a must-have for any measurement collection. Made from high-quality copper, this ladle is not only durable but also provides even heat distribution.  Diameter: 1...

It's the tried-and-true jewelers' hard soldering flux. Yellow-green and self-pickling, it is the best in water-based fluxes. Well-mixed to eliminate suspension. 8 oz. spray bottle. MSDS.

For over 50 years, the proven standard of quality. Makes hard soldering as easy as soft soldering. Use on gold, silver, platinum and other metals with high melting points. Preserves...

This bead stringing awl has a hardwood handle and fine point for bead knotting or cleaning out bead holes. Made of special alloy, the point can be bent to any...

Excellent for wire working or used as binding wire. Made of #304 stainless steel. Dead soft; packaged on 8 ounce spool in a clearly labeled box. GAUGE SIZE 24 .020"...

Ultra-refined butane fuel specifically geared for use with Micro Torch. Special, non-clogging formula allows extended use. Includes a single piece, universal tip. 9.12 fl. oz. can. This product can only be...

The Blazer® line of hand tools features unparalleled quality, craftsmanship and a proven track record of over 20 yers of professional use. 20 min. burn time. Chamber capacity is 6 grams....

Makes paste by the addition of water. When applied, acts as a flux and allows solder to flow. Best used to line the insides of crucibles as it helps extend...

Makes paste by the addition of water. When applied, acts as a flux and allows solder to flow. Best used to line the insides of crucibles as it helps extend...

Dissolve in denatured spirit in a glass container to make a liquid flux. Recommended for general soldering tasks. Keep covered as it evaporates easily.

The classic Buffalo Dental Alcohol Torch is an economical device that produces a needle-point flame with only a gentle squeeze of the plastic bottle. The unit now has an optional...

Nickel-plated with tapered, serrated stems for use with 5/16" (8 mm) ID tubing. 11/16" ignition collar stabilizes flame. With adjustable air intake and 3" base diameter. For use with natural...

Bunsen Burner has adjustable pilot flame with T-handle valve. An 1 1/16" ignition collar stabilizes flame. Use with 5/16" ID tubing. 3" base diameter with 6" height. For use with...

Has needle valve gas control adjustment to provide flame from very hot brush to needle with intense heat. 3" base diameter with 41/2" height. Uses 1/4" tubing. For artificial or...

Nickel-plated with tapered, serrated stem for use with 5/16" (8 mm) ID tubing. Lever in base adjusts air intake. 2" base diameter with 2 9/16" height. For use with natural...

Solid state, trigger ignition melter uses clean burning fuel for on-the-spot work. Adjustable flame temperature up to 2500°F. Ideal for heating wax working tools and smoothing wax models. Unit may...

Holds rings, leaving both hands free. Mounted in fixed position on asbestos-free base. Length of rod is 6".

Ceramic tapered rod on a heavy base to suit all ring sizes. Mounted on a universal base to position the article at any angle.

Made from selected soft wood. Easy to pin or press work pieces while soldering. Creates a reducing atmosphere and reflects heat back on the article being soldered. Measures 5 1/2"...

A time proven technique for effective soldering. Under flame, the charcoal glows and reflects heat back in to work, making the flame more efficient. Select, close-grained, knot-free wood is chemically...

A non-toxic, non-corrosive paste that protects stones, plastics and precious metals from damage by heat while soldering or brazing. Withstands heat up to 3000°F. Cleans away easily with water.

Frequently used, non-toxic, non-asbestos paste for localized protection from heat damage during soldering and brazing. Effective up to 2000°F. Easily cleaned by water. 4 oz. tube.

These tongs are suitable to use when immersing articles in pickling or acidic solutions. Will not contaminate or corrode the solutions. Overall length 9".

This copper pickling tweezers provide more strength than ordinary copper tweezers. Made to lift heavier objects, legs are less flexible than others. For years people have been dropping articles because copper...

Non-asbestos. Flat on one side, with grooves on the other, for holding shanks, chains, etc. Withstands temperatures up to 2000° F (1093° C). Size: 7-1/2" x 7-1/4" x 7/8".

Unique tungsten steel alloy withstands temperature up to 3000°C for 5-10 minutes. Handles protected by insulating sleeves of heat resistant rubber.

For use in low temperature brazing and silver soldering ferrous and non-ferrous metals. Begins to dissolve oxides at 800°F (427°C) an is fluid - active between 1100° and 1600°F (593° and 871°C)....

This handy holding device comes with a round base. Each are heavy, non-tipping bases equipped with ball joint attachments which can position work at any angle. Cross-locking tweezers and various...

Set of 3 Titanium Soldering Probes by Durston, Essential part of any soldering kit, high quality titanium tips stops other metals bonding and prevents melting of the probe.Hexagonal Head to...

Made of stainless steel with a serrated base and side lock. ideal for holding shanks and settings in position when soldering.

Made of stainless steel with a serrated base and side lock. ideal for holding shanks and settings in position when soldering.

This utility tweezer has smooth curved points and is excellent for all soldering and utility applications.

Lightweight, soft insulating Fire Bricks are great for soldering applications. May be carved and pinned. Measures 9" x 4.5" x 2.5". MSDS.

Firescoff™ is an award winning spray ceramic coating that prevents oxidation and scales, acts as a flux, and featured easy removal with just warm water. No paste or liquid flux is...

Gentec regulators are manufactured using the latest state-of-the-art equipment. With chrome plated housing caps and body machined from class “A” brass bar stock, our regulators are single stage with rear...

Solder for the identical match to the carat of the piece to be soldered. All free flowing to provide a strong permanent joint. Available in three grades. Cadmium free. Sold by...

Solder for the identical match to the carat of the piece to be soldered. All free flowing to provide a strong permanent joint. Available in three grades. Cadmium free. Sold by...

Solder Paste Yellow. 1 dwt. syringe. SDS.

A dry, granular acid compound used to pickle gold, silver, and other non-ferrous metal castings.  2.5 lb.

A liquid hard soldering flux for metals which melt under 2000° F (1093° C). 4 oz. This item is only available for domestic purchases. If this item is added to an...

Just add small amounts of Griffith's Yellow Ochre with alcohol to area needed to be soldered. 2 oz.This item is only available for domestic purchases. If this item is added to...

The High-Temp Soldering Platform is perfect for brazing and soldering most precious and base metals, including high-temperature work on platinum. Works great with GRS Third-Hand Attachments. For filler metals (solder)...

Perfect for use with GRS Third-Hands. Max 600°F (316°C).

GRS® Third-Hands make precise soldering easy by holding parts in the exact position you want. With unequaled flexibility, these Third-Hands can twist, rotate and bend in all directions.