Quite simply the fastest way to form bezels in different shapes. May also be used to make decorative wire forms. These mandrels are made of case hardened, tempered steel, precision...

Formed from solid steel for strength and durability, this tool is ideal for forming and hammering rings. 

Shape, stretch or form bracelets using these tough polished cast iron mandrels. Tang is 1 3/4" long. Measures 1 3/4" x 2 1/8" x 2 1/2" x 2 3/4".

Shape, stretch or form bracelets using these tough polished cast iron mandrels. Tang is 1 3/4" long. Measures 3" to 2".

Shape, stretch or form bracelets using these tough polished cast iron mandrels.Tang is 1 3/4" long. Diameter 2" - 2 1/4", 2 1/2" - 2 3/4".

These mandrels are adaptable for shaping, stretching and forming bracelets. Exterior surface is smoothly polished. Available in round and oval shapes. ROUND 1 3/4" x 3 1/2" x 15" Length...

These mandrels are adaptable for shaping, stretching and forming bracelets. Exterior surface is smoothly polished. Available in round and oval shapes. ROUND 1 1/2" x 3 1/2" x 15" Length...

This Economy Ring Mandrel with Finger Sizers is designed for precision measurement and sizing of rings. Featuring a sturdy aluminum construction, this mandrel ensures accurate and consistent sizing for all...

Includes holder body, 7 collets, expansion screw and wrench. Many wide, delicate or unusual rings are difficult to hold with an outside clamp. This attachment adds inside ring-holding capability to...

End of wood handle is bored and reinforced. Can be threaded onto tapered spindles so that small wheels, burs, etc. can be used on larger polishing motors. The chuck opens...

AQUSYZE, guaranteed accurate US sizes. Case hardened, hard chromed , stainless steel ( Rockwell 15-16) DEEP laser engraved markings. Stainless Steel ring mandrel produced to the absolute highest standards. Graduated...

Steel mandrel for abrasive cartridge rolls. Pilot guides roll for absolute true running. For use with cartridge rolls. 3/32" shank. Sold individually.

An accessory for holding small diameter tools. Adapter shank fits 3/32” quick release hand pieces. Do not use with speeds higher than 10,000 rpm.

Chuck with 2 collets will take bits from 0 to 2.34mm, drill sizes 80-43. Because the mandrel shank is 3/32″, this chuck is excellent to use with flex shaft machines....

Steel arbors with a solid synthetic rubber drum. Expands evenly to hold sanding bands. Cushioned backing for a smooth cut and uniform finish. 3/32" shank. For use with sanding bands....

Steel arbors with a solid synthetic rubber drum. Expands evenly to hold sanding bands. Cushioned backing for a smooth cut and uniform finish. 3/32" shank. For use with sanding bands....

Will fit wheel sizes up to those listed. Ideal for use with rubberized abrasives.

Inside ring cylinder mandrel. Use for inside ring polishers. 3/32" shank comes with a full thread starting from the top. Sold individually.

Choose shank size. 

Foredom's micro chuck mandrel is specifically for use with #70 - #80 drills. 10,000 RPM max speed. Sold individually.

Chuck mandrel for silicone pins. Pins can be held at various lengths. 3/32" shank.

Mandrel for abrasive wheels, cutting discs and bristle brushes. For use in flexshaft handpiece. Thread ends are right handed. 3/32" shank.  

Reinforced screw mandrel with 1/8" shank. Sold individually.

Designed for felt buffs, wheels, cylinders and points. Threads are right handed. Use for wheels with 1/16" arbor hole. 3/32" shank.

Mandrel for abrasive wheels, cutting discs and bristle brushes. For use in flexshaft handpiece. Thread ends are right handed.  

One piece construction with a snap-on end. Square drive is positive and avoids slippage. 3/32" shank.

Mandrel with slot to grip abrasive paper or cloth. Use to build a suitable diameter for inside finishing. 3/32" shank. Thin 9/64" Head Regular 11/64" Head  

Mandrel with slot to grip abrasive paper or cloth. Use to build a suitable diameter for inside finishing. 3/32" shank. 3/16" Head. 

Mandrel for abrasive wheels, cutting discs and bristle brushes. For use in flexshaft handpiece. Thread ends are right handed. Shank: 3/32" Head Ø: 3/16" Thread: 1/16"   

Use for through or blind holes in cylinders Thread ends are right handed. Shank: 3/32". 5/8" long with nut.

Holding a ring mandrel while working is no longer a problem. This rest providesthe solution by giving support at both ends. Made of cast iron. Also used to holdbracelet mandrels...

Perfect for forming round, square, triangle and rectangle bezel settings. Can be used to set stones. Used for fabricating round catches, jump rings and many other items that require small...

Machined from aircraft grade aluminum, harden anodized finish - this mandrel is the absolute market leader when it comes to quality, precision, and sizing consistency.  Sizes 1-16. Aircraft quality aluminum, military...

Machined from high carbon, hardened steel and polished to perfection this mandrel is the absolute market leader when it comes to quality, precision, and sizing consistency.  Sizes 1-16. Hardened and polished...

Used for forming, shaping and straightening. A one of a kind beauty with 8 sides for forming.

Ultra Precision Calibrated Ring Mandrels by Pepe Tools. Hardened and polished high grade steel. Calibrated to ISO specifications. Accurate within +/- 1.5μm. US Sizes 1-16. Packaged in protective reusable case....

The Pin Chuck Set is an essential tool for any DIY enthusiast or professional craftsman. With its versatile pin chuck set, you can easily and securely hold and drill small...

A durable, economical solid aluminum ring stick in two versions, regular or grooved for stone set rings. Measures #1-16 in 1/4 size increments.

A durable, economical solid aluminum ring stick in two versions, regular or grooved for stone set rings. Measures #1-16 in 1/4 size increments.

This extra large size mandrel accommodates sizes 16 to 24 in 1/2" increments. It is provided with a knurled hand grip and is practical for use on custom designed jewelry....

Elegantly finished, tubular nickel plated ring stick is extra lightweight and provided with a shaped redwood handle for comfort. Ideal for wax working as the hollow tube does not retain...

Universal for US & European Standard Sizes.

Made of hard plastic, this ring stick provides precise and accurate measurements. Markings are legible and indicate sizes #1-15 in 1/4 size increments. Mandrel comes grooved.

Scratch proof ring sizer with universal measurements. Sizes range in 1-15. Teflon coated.

Seasoned wood mandrels provide a snug fit for emery ring shells. Pre-drilled center hole for use on a bench polisher.

Hardwood mandrel with slot to bind emery paper or cloth. Fits on tapered end of polishing spindles.

Stepped aluminum mandrel securely mounts on a steel base and easily rotates 360°. The smooth round steps allow you to precisely size rings when wax working or using metal clay....

These hardened and polished steel mandrels are especially used for shaping and forming rings. Accommodates all ring sizes #1-16 in 1/4 size increments.